Sledge shaped nozzle with 9 rear jets for pipe bottom cleaning. Each jet has a different angle, so the water can easily reach lateral parts of big round or square pipes.
Because of the shape, weight and jet configuration, Magredi nozzles can easily be adapted to high pressure pumpswith 150-350 lt/min flow. The sledge shape allows the nozzle to overtake obstacles and sediments, with less risk of getting stuck in the mud.
Ceramic inserts are set as standard configuration, carbide inserts (for water recycling units) upon request. To be used with rotary swivel.
Works great in 15" to 60" Pipe. This water shovel nozzle needs a minimum of 40 GPM and a max pressure of 3,000 PSI. Makes easy work of removing sand, sludge, stones, rocks and debris from the pipe. Replaceable ceramic inserts.
MAGREDI PLUS is a special version of this nozzle with 7 additional jets. The water is used for an all-around pipe cleaning, with a direct and closer effect than a conventional nozzle, increasing cleaning efficiency thanks to 75° and 90° angle of the additional jets. With the double configuration of jets PLUS version makes it possible to get 2 nozzles in 1.
Specifications:
| Inlet |
1"F |
| Ø x L (inches) |
13.98 x 6.30 x 4.72 |
| Weight (lbs) |
48.50 |
| Rear Jets |
9 @ 0°/5°/10°/15°/25° |
| Front Jets |
5 @ 75° |
| Lateral Jets |
2 @ 90° |
| Inserts |
TE M10x1 |
| Min Flow (gpm) |
39.63 |
| Working DN (inches) |
15.75 - 47.24 |
