1/2" Nozzles

WS - 1/2" thread / 4-8" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a SLOW viscous fluid governor that slows the rotating speed of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The Ripsaw HD blasts a 0-degree straight water stream at up to 3200 PSI while rotating at a high speed to provide an 18-degree cone of coverage. The cone-shaped flow pattern is ideally suited for potholing applications.

Constructed with stainless steel housing and tungsten carbide wear surfaces.

The upgraded new heavy-duty coating is a special forumaltion designed for use in extreme environments including frost, shale, and other rocky conditions while protecting users and sensitive underground utilities.

The nozzle enz® KBRV is provided with 2 semi-radial jets directed forward in an angle of 45°. As a result, this nozzle must either be equipped with extra thrust jets or be mounted on a lance. The forward jets desintegrate most any residue and flush the debris ahead of the nozzle.

Applications

• To remove plastic deposits
• To clean heat exchangers
• Cleaning of fat deposits
• Flushing of the pipes from the house toward the main line

***Please leave a comment upon checkout noting the PSI and GPM required***

enz® nozzles with forward impact angle of approx. 45° on the pipe wall as well as a front jet (on request) and 3 retro-thrust jets cause a cork-screw-like advance through the clogged pipe. While the front nozzles loosens and the semi-radial nozzles disintegrate the residues, the thrust nozzles are driving the nozzle head forwards and simultaneously pushing the waste material backwards.

Applications

• Core-flushing of the steel pipes during hydraulic thrust-boring
• Cleaning of house connecting pipework from inside to the drain system
• Removal of ice in manholes

***Please leave a comment upon checkout noting the PSI and GPM required***

The semi-radial rotating enz®  nozzles with their 4 retroacting cutting-jets at an angle of approx. 45° cause simultaneously the cleaning procedure and the thrust for the forward move of the tool i.e. the jets combine rotation and thrust in one function resulting in a low water consumption. With sufficient water capacity, optional thrust jets can facilitate upward cleaning.

Applications

• Cleaning of pipes before TV-recordings
• To remove mineral deposits in pipes
• To remove roots up to Ø 0.2 inch

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz®  cutting ball works without impact, but has the ability to switch in vibration. The cutting ball is equipped with a hard metal front cut for pipes that are more than 50% clogged. The side blades are self-sharpening and maintain their sharpness over their entire service life.

The cutting ball's area of application is diverse. Due to its spherical shape it goes easily around curves without damaging the pipe. The cutting ball is leakage-free and can be operated with recycling water.

Applications

• Interlaced roots
• Mineral deposits
• Lime scale

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

SUPERIOR PERFORMANCE – The Machete blasts a 0-degree water stream that oscillates at an optimal speed creating a 15-degree wedge of powerful flow. This will allow you to dig faster in the hardest and most compact soil types. By harnessing the power of a straight tip nozzle while oscillating, it creates a superior tool for trenching capabilities.

RUGGED & REPLACEABLE – This heavy duty, high impact nozzle is constructed of a stainless-steel housing and tungsten carbide wear surface. Lab validated to outlast other Hydra-Flex nozzles, the Machete can withstand harsh environments and provides a longer run than ceramic nozzles. The Machete also comes with a replaceable nylon cover that allows for instant changeability while increasing the overall core nozzles’ life cycle.

SAFETY – The unique oscillation design of the nozzle helps reduce undermining that may occur when using traditional rotating nozzles ensuring the operator’s safety. Continued use of the non-conductive cover on the nozzle body protects users and sensitive underground utilities.

EFFICIENCY – Whether it’s trenching or cutting through compact soils, the Machete acts as a finishing tool for any job. With a controlled oscillation that is faster than traditional nozzles, it allows you to save even more water.

Excellent Pulling and Flushing Power!!

• 10 - 25 GPM
• 6 or 8 Rear jets @ 15°
• Up to 4,000 PSI

The shape of the Arzino flushing nozzle allows easy navigation through tight elbows and provides easy retrieval from the pipe.  This Nozzle is ideal where high thrust is required in the pipe.  Comes 6 or 8 rear steel inserts set at a 15° angle for flushing power.  Also has optional front jet for Penetration.

Arzino Flushing Nozzle Specifications

Video of Arzino Flushing Nozzle

Turbine for Superior Drive and Thrust

Features:

• 10-25 GPM, up to 4,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• Comes with case
• Easy and fast changeable chain retainers

Turbine Cutting Nozzle Specifications

Turbine for Superior Drive and Thrust

Features:

• 10-25 GPM, up to 4,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• Comes with case
• Comes with stainless steel drilling head; Carbide drilling head available

Carbide head can be used instead of steel drilling head for more aggressive drilling in pipe.

Turbine Cutting Nozzle Specifications

The premier penetrating nozzle made by NCT

The rotating front jet forms a high efficiency water cone with high impact capacity for blockages and obstructions making the nozzle much more aggressive than a conventional front jet penetrator.   This nozzle is ideal when jetting downstream from the entry point to the main for scale removal, grease, roots etc.

• High Impact Rotating Front Jet !
• 3 Ceramic rear jets @ 20°
• 10 - 25 GPM, up to 4,000 PSI 

'Bora' Penetrator Nozzle Specifications

Video of Twister Penetrator Nozzle

Low Angle Jets for High Thrust
The ultimate flushing power in larger pipe

• 10 - 25 GPM
• Up to 4,000 PSI
• 6 or 10 Rear Ceramic Jets at 5° & 10°

These high efficiency nozzles are manufactured in hardened alloy steel and are designed for high thrust. A Deviator set inside the nozzle maximizes flow efficiency reducing pressure drop.

Canin High Efficiency Nozzle Specifications

Video of Canin High Efficiency Nozzle

A DUAL PURPOSE NOZZLE AT A GREAT PRICE!

• Includes Front Jet AND Plug: 1 Front & 6 Rear - OR - 6 Rear Only @ 30°
• Optional Front Jet for Blockage Penetration
• 10 - 25 GPM
• up to 4,000 PSI

Small OD for Easy Bend Navigation!

EXCELLENT FLUSH/CLEAN AND PENETRATOR NOZZLE!

Hardened Stainless Steel
All Ceramic Inserts
PERFORMANCE AND DURABILITY!

• 10 - 25 GPM
• up to 4,000 PSI
• 30° High angle jets for effective cleaning of pipe walls
• A Deviator set inside the nozzle maximizes flow efficiency reducing pressure drop

Best choice in frequent mainline cleaning

Isonzo Cleaning Nozzle Specifications

Video of Isonzo Grenade Cleaning Nozzle

A great degreaser and de-icer nozzle

• 3F @ 10° and 6R jets @ 45°
• Change rear to 35° for extra pulling power
• 3 - 20 GPM
• Up to 4,000 PSI

A 45° angle is the default choice for this pattern. However, when faced with a longer run a 35° angle will provide extra pulling power. Pattern: 3 forward jets @ 10° and 6 rear jets @ 45° Please specify if 35° is needed.

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Maximum Cleaning Action from 90° Side Jets with 45° for Flushing / Pulling.

• 2 side jets @ 90° & 2 rear jets @ 45°
• 10 - 25 GPM, up to 4,000 PSI

CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Superior Flushing Power

A pristine round hex design.
Jet pattern: 6 rear jets @ 20°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Superior Flushing Power

A pristine round hex design.
Jet pattern: 6 rear jets @ 20°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

High Efficiency Stainless Steel Nozzles Machined in 2 Sections

Smooth interior surface - shaped to reduce drag & turbulence

• 30° Drilled Jets on All Rear Patterns

Nozzles are available with or without a penetrating forward jet. All nozzles are custom sized for pump pressure and flow. Designed with wrench flats to permit nozzles to be quickly tightened and removed from hose fittings

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Replaceable ceramic inserts
• Stainless steel construction
• 10-25 GPM
• Up to 4,000 PSI

A dual-angle nozzle combining thrust and flushing power

Pattern: 3 rear jets @ 45° & 3 rear jets @ 25°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

A dual-angle nozzle combining thrust and flushing power

Pattern: 1 forward, 3 rear jets @ 45° & 3 rear jets @ 25°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 10 - 25 GPM
• Up to 4,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

The "Tremol" series of spinner nozzles are very effective tools for cleaning inside of pipes. The rotating element and jets scour the surface of the pipe loosening hard debris. Spinner nozzles are great for descaling and emulsifying grease.

• 4 Jets on spin barrel @ 90°
• 6 or 3 Rear jets @ 20° 
• 10-25 GPM, up to 4,000 PSI
• Cleans the entire inside pipe wall
• Good for vertical columns (1/2" nozzle)

Tremol Nozzle Specifications

Video of Tremol Spinner Nozzle