1" Nozzles

Skid Shaped Heavy Shovel Nozzle for Floor Cleaning in Flat Pipes.
Nozzle is a virtual water shovel in larger lines.

Applications: Sand, Sludge, Mud, Stones, Rocks, etc.

• 9 rear jets inclined @ 0°/5°/10°/15°/25°
• Additional 7 Jets - 5@75° / 2@90° for Total Pipewall Cleaning
• Use with rotary swivel
• 50 - 100 GPM, up to 3,000 PSI
• Works in 15" - 60" size pipes
• All Replaceable Ceramic Inserts.

Works great in 15" to 60" Pipe. This water shovel nozzle needs a minimum of 50 GPM and a max pressure of 3,000 PSI. Makes easy work of removing sand, sludge, stones, rocks and debris from the pipe. Replaceable ceramic inserts.

Magredi Nozzle Specifications

Video of Magredi Nozzle

Skid shaped heavy shovel nozzle for floor cleaning in flat pipes.
Nozzle is a virtual water shovel in larger lines.

Applications: sand, sludge, mud, stones, rocks, etc.

• 9 rear jets inclined @ 0°/5°/10°/15°/25°
• Use with rotary swivel
• 50 - 100 GPM, up to 3,000 PSI
• Works in 15" - 60" size pipes
• All replaceable ceramic inserts.

Works great in 15" to 60" Pipe. This water shovel nozzle needs a minimum of 50 GPM and a max pressure of 3,000 PSI. Makes easy work of removing sand, sludge, stones, rocks and debris from the pipe. Replaceable ceramic inserts.

Magredi Nozzle Specifications

Video of Magredi Nozzle

Nicely Weighted for Debris Removal

Perfect for Sand, Sludge, Silt, Etc.

Mainlines - Storm Drains - Culverts !

• 14 - 25 GPM, up to 4,000 PSI

The 4 Rear Ceramic Inserts concentrate cleaning at the bottom of the pipe. The flat nozzle is ideal for removing sand, sludge, debris, etc. in 6" and 8" pipe.

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

Excellent Pulling and Flushing Power!!

• 50 - 80 GPM
• 6 or 8 Rear jets @ 15°
• Up to 3,000 PSI

The shape of the Arzino flushing nozzle allows easy navigation through tight elbows and provides easy retrieval from the pipe.  This Nozzle is ideal where high thrust is required in the pipe.  Comes 6 or 8 rear steel inserts set at a 15° angle for flushing power.  Also has optional front jet for Penetration.

Arzino Flushing Nozzle Specifications

Video of Arzino Flushing Nozzle

Turbine for Superior Drive and Thrust

Features:

• 50-80 GPM, up to 3,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• Comes with case
• Easy and fast changeable chain retainers

Turbine Cutting Nozzle Specifications

Turbine for Superior Drive and Thrust

Features:

• 50-80 GPM, up to 3,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• Comes with case
• Comes with stainless steel drilling head; Carbide drilling head available

Carbide head can be used instead of steel drilling head for more aggressive drilling in pipe.

Turbine Cutting Nozzle Specifications

The premier penetrating nozzle made by NCT

The rotating front jet forms a high efficiency water cone with high impact capacity for blockages and obstructions making the nozzle much more aggressive than a conventional front jet penetrator.   This nozzle is ideal when jetting downstream from the entry point to the main for scale removal, grease, roots etc.

• High Impact Rotating Front Jet !
• 8 Ceramic rear jets @ 20°
• 50 - 80 GPM, up to 3,000 PSI 

'Bora' Penetrator Nozzle Specifications

Video of Twister Penetrator Nozzle

Low Angle Jets for High Thrust
The ultimate flushing power in larger pipe

• 50 - 80 GPM
• Up to 3,000 PSI
• 6 or 10 Rear Ceramic Jets at 5° & 10°

These high efficiency nozzles are manufactured in hardened alloy steel and are designed for high thrust. A Deviator set inside the nozzle maximizes flow efficiency reducing pressure drop.

Canin High Efficiency Nozzle Specifications

Video of Canin High Efficiency Nozzle

Dual Degree Pattern For Thrust & Cleaning
Spray pattern allows for strong cleaning without loss of pulling traction

• 16 Ceramic Rear Jets
• 8 rear jets at 20°
• 8 rear jets at 30°
• 60 - 80 GPM, up to 2,000 PSI
• Weight: 22 lbs.

Duranno high efficiency nozzles are manufactured in hardened alloy steel and are designed for a combination of general pipe wall cleaning and expelling of materials from the pipe. These nozzles are supplied with ceramic inserts. To improve the performance a deviator is set inside the Nozzle to maximize flow efficiency, reducing pressure drop. A very effective combination Cleaning Nozzle for any large Jetter.

Fara 1" High Thrust Nozzle

Low Angle Jets for High Thrust

The Ultimate flushing power in larger pipe

Features:

• 10 Rear Ceramic Jets @ 15° For Heavy Removal
• 60 - 80 GPM
• Up to 2,000 PSI

These high efficiency nozzles are manufactured in hardened alloy steel and are designed for general cleaning and expelling of materials. These nozzles are supplied with ceramic inserts. To improve nozzle performance high efficiency nozzles have a deviator inside the nozzle to maximize flow efficiency, reducing pressure drop. A quality Cleaning or Flushing Nozzle for any large jetter.

High Thrust Jetter Nozzle Specifications

Hardened Stainless Steel
All Ceramic Inserts
PERFORMANCE AND DURABILITY!

• 50 - 80 GPM
• up to 3,000 PSI
• 30° High angle jets for effective cleaning of pipe walls
• A Deviator set inside the nozzle maximizes flow efficiency reducing pressure drop

Best choice in frequent mainline cleaning

Isonzo Cleaning Nozzle Specifications

Video of Isonzo Grenade Cleaning Nozzle

Maximum Cleaning Action from 90° Side Jets with 45° for Flushing / Pulling.

• 2 side jets @ 90° & 2 rear jets @ 45°
• 2 - 50 GPM, up to 4,000 PSI

CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 50 - 80 GPM
• Up to 3,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI (3,000 PSI for 1")

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The "Tremol" series of spinner nozzles are very effective tools for cleaning inside of pipes. The rotating element and jets scour the surface of the pipe loosening hard debris. Spinner nozzles are great for descaling and emulsifying grease.

• 4 Jets on spin barrel @ 90°
• 6 or 3 Rear jets @ 20° 
• 50-80 GPM, up to 3,000 PSI
• Cleans the entire inside pipe wall

Tremol Nozzle Specifications

Video of Tremol Spinner Nozzle

Successfully navigates over offsets in the pipe!
Removes obstructions and opens blockages in no time!
15° Rear jets to flush back debris!

• 3 front jets at 15° and 1 front jet at 0°
• 6 or 8 rear jets @ 15°
• Replaceable steel and ceramic inserts
• 50 - 80 GPM, up to 3,000 PSI

VIBRATION AND BOUNCE BREAK UP DEPOSITS
Displaces the most resistant deposits in 4"-24" pipes

Intended for use in plastic (HDPE, PVC etc.) and cast iron pipes only.

• Removes mineral deposits, concrete, building materials, etc
• Lightweight vibrating nozzle with ceramic inserts
• Head and rear body shape avoids nozzle getting stuck on joints
• 50 - 80 GPM

Vibro 'Jiggler' Nozzle Specifications

Video of the Vibro Jiggler Nozzle

WG - 1" thread / 6-36" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a FAST viscous fluid governor that speeds up the rotation of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

This versatile chain cutting combo kit is used for more aggressive cutting with bike chain.
Would need centralizer. Very well priced combo kit!

Pattern: 3 Jets @ 90° on spin - 6 @ 25° on rear (Ceramic Inserts)

• 40-100 GPM
• Up to 2,500 PSI
• Comes with three lengths of motor chains
• Motor chain for 8", 12", 18, and 24" pipes
• Knife head included
• Tools to Replace Chains and Inserts
• Comes with case

Maniago Root Cutter Nozzle Specifications

Comes with 6", 8", 10", & 12" Heavy Duty Saws!
Also Includes 6", 8", 10", & 12" EZ Skids

Root Cutter Motor Kit comes complete with 4 saws. 4 skids, tool box, turn tool for maintenance, bolt set and saw hub.

This motor produces more torque than any other motor in its class on the market today. It produces 175 in/lbs. of torque whereby other lesser models produce only around 150!

Of course like any mechanical item you must maintain it. To do this, turn it upside down and use our Arbor turning tool to turn the motor and purge the water out with a few good turns. Then use your favorite oil or lubricant and turn it again with the oil inside to make sure it is ready to go for the next job.

Our Arbor turning tool is innovative and great since you don’t have to take off the saw blade to turn the motor shaft.

It comes with the front saw hub RSH-1B to fit right over the 1” shaft of the motor and also a bolt set and Allen wrench to attach the skids to the motor.

From 1,500 - 3,000 PSI

50 - 100 GPM

Best High Performance Kit for Jet Operator !
50-80 GPM, up to 3,000 PSI - Nozzle Case Included
Deviator set Inside Nozzles Maximizes Flow Efficiency Reducing Pressure Drop.

• CANIN - 6/10 Rear Jets @ 5° & 10°
• Superb Thrust for Flushing and Expelling of Materials
• BORA - 1F and 6/8 Rear Jets @ 20°
• Rotating Front Cone Jet for More Efficient High Impact Penetration
• ISONZO - 1F(optional) and 6/8/12 Rear Jets @ 30°
• Excellent Pipe Wall Cleaning Prior to Lining/TV Inspection
• High Performance Kits with ALL CERAMIC Inserts

High Performance Package - With Case!
50-80 GPM, up to 3,000 PSI
Limited Time Special - Excellent Value - Quality Nozzles!

• Tremol- Spinner Nozzle for Descaling and Grease etc.
• Arzino - Egg Style Flushing Nozzle
• Isonzo - The Best General Cleaning Nozzle
• Raut - Forward Penetration - Blockage Removal
• High performance 4 nozzle kit ALL with replaceable inserts

'Solo' Turbine Chain Nozzle Kit

Root Cutter Nozzle with Welded Carbide Plates on Circular Chain.

• 1" Nozzle Works in 6" & 8" Pipe
  - Comes with 6" & 8" Chain and Centralizers
  - 4 rear Ceramic inserts at 20° - 3 @ 90° on Rotation
  - 50-80 GPM up to 3,000 PSI
• All Kits come with Nozzle Case

Aggressive Carbide Tipped Chain for Roots and Hard Materials on Pipe Wall.

Very Effective on Removal of Unsuccessful Liners, Patch Repairs, etc.

Solo Turbine Nozzle Specifications

Video of Solo Turbine Nozzle

Turbine for Superior Drive and Thrust

Comes with Rotating Chain, Drilling Heads & Additional Chain

• 30-50 GPM, up to 3,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• 3/4" good for 4"-8" pipes - weight 2.2 lb
• 4 rear jets at 20° on 3/4"
• Comes with case
• Easy and fast changeable chain retainers
• Carbide drilling head available

Carbide head can be used instead of steel drilling head for more aggressive drilling in pipe.

***Please note in comments during checkout the PSI and GPM you require ***

Turbine Cutting Nozzle Specifications

Video of 3/4" Avian