Root Cutting Nozzles

WV WARTHOG® - 1/4" thread / 2-4" pipe /  works with 3-4k PSI

The WARTHOG® WV uses a rotating head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

WS - 1/2" thread / 4-8" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a SLOW viscous fluid governor that slows the rotating speed of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

Comes with 6", 8", 10", & 12" Heavy Duty Saws!
Also Includes 6", 8", 10", & 12" EZ Skids

Root Cutter Motor Kit comes complete with 4 saws. 4 skids, tool box, turn tool for maintenance, bolt set and saw hub.

This motor produces more torque than any other motor in its class on the market today. It produces 175 in/lbs. of torque whereby other lesser models produce only around 150!

Of course like any mechanical item you must maintain it. To do this, turn it upside down and use our Arbor turning tool to turn the motor and purge the water out with a few good turns. Then use your favorite oil or lubricant and turn it again with the oil inside to make sure it is ready to go for the next job.

Our Arbor turning tool is innovative and great since you don’t have to take off the saw blade to turn the motor shaft.

It comes with the front saw hub RSH-1B to fit right over the 1” shaft of the motor and also a bolt set and Allen wrench to attach the skids to the motor.

From 1,500 - 3,000 PSI

50 - 100 GPM

This versatile chain cutting combo kit is used for more aggressive cutting with bike chain.
Would need centralizer. Very well priced combo kit!

Pattern: 3 Jets @ 90° on spin - 6 @ 25° on rear (Ceramic Inserts)

• 40-100 GPM
• Up to 2,500 PSI
• Comes with three lengths of motor chains
• Motor chain for 8", 12", 18, and 24" pipes
• Knife head included
• Tools to Replace Chains and Inserts
• Comes with case

Maniago Root Cutter Nozzle Specifications

Original Root Rat Nozzle Kit

Kits include chain & cable rotors  ***Due to supply issues only Link chain is available***
Comes with case and accessories

1" Kits:

• 30 - 200 GPM
• Available with link chain or roller chain
  
• Aluminum ring skid system
• 3 spin jets and 3 thrust jets

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz®  cutting ball works without impact, but has the ability to switch in vibration. The cutting ball is equipped with a hard metal front cut for pipes that are more than 50% clogged. The side blades are self-sharpening and maintain their sharpness over their entire service life.

The cutting ball's area of application is diverse. Due to its spherical shape it goes easily around curves without damaging the pipe. The cutting ball is leakage-free and can be operated with recycling water.

Applications

• Interlaced roots
• Mineral deposits
• Lime scale

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

6 Jets @ 90° on Rotation - 6 @ 25° on Rear

• 30-50 GPM, up to 3,000 PSI
• Comes with 3 sets of chains - 6" - 8" - 12"
• Stainless Steel Cutter with Round & Knife Head
• Case and Tools to Replace Chains and Inserts

Aggressive kit with interchangeable heads.
Used for root removal, scale, rust, damaged liners, etc. in 6"/8"/12" Pipe

 *** A centralizing skid is HIGHLY recommended for proper use of this tool. You can find the proper centralizer here***

Carnia Root Cutter Specifications

https://jetterdepot.com/products/carnia-root-cutter-nozzle-skid-only?utm_source=copyToPasteBoard&utm_medium=product-links&utm_content=webhttps://jetterdepot.com/products/carnia-root-cutter-nozzle-skid-only?utm_source=copyToPasteBoard&utm_medium=product-links&utm_content=webhttps://jetterdepot.com/products/carnia-root-cutter-nozzle-skid-only?utm_source=copyToPasteBoard&utm_medium=product-links&utm_content=web

Turbine for Superior Drive and Thrust

Features:

• 10-25 GPM, up to 4,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• Comes with case
• Easy and fast changeable chain retainers

Turbine Cutting Nozzle Specifications

Turbine for Superior Drive and Thrust

Features:

• 30-50 GPM, up to 3,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• 3/4" good for 4"-8" pipes - weight 2.2 lb
• 4 rear jets at 20° on 3/4"
• Comes with case
• Easy and fast changeable chain retainers

Turbine Cutting Nozzle Specifications

Video of 3/4" Avian

Turbine for Superior Drive and Thrust

Features:

• 50-80 GPM, up to 3,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• Comes with case
• Easy and fast changeable chain retainers

Turbine Cutting Nozzle Specifications

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI (3,000 PSI for 1")

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI (3,000 PSI for 1")

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

VIBRATION AND BOUNCE BREAK UP DEPOSITS
Displaces the most resistant deposits in 4"-24" pipes

Intended for use in plastic (HDPE, PVC etc.) and cast iron pipes only.

• Removes mineral deposits, concrete, building materials, etc
• Lightweight vibrating nozzle with ceramic inserts
• Head and rear body shape avoids nozzle getting stuck on joints
• 4 - 9 GPM

Vibro 'Jiggler' Nozzle Specifications

Video of the Vibro Jiggler Nozzle

VIBRATION AND BOUNCE BREAK UP DEPOSITS
Displaces the most resistant deposits in 4"-24" pipes

Intended for use in plastic (HDPE, PVC etc.) and cast iron pipes only.

• Removes mineral deposits, concrete, building materials, etc
• Lightweight vibrating nozzle with ceramic inserts
• Head and rear body shape avoids nozzle getting stuck on joints
• 14 - 25 GPM

Vibro 'Jiggler' Nozzle Specifications

Video of the Vibro Jiggler Nozzle

WG - 1" thread / 6-36" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a FAST viscous fluid governor that speeds up the rotation of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

WH - 1/2" and 3/4" thread / 6-18" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a FAST viscous fluid governor that speeds up the rotation of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

WT - 3/8" or 1/2" thread / 3-6" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a SLOW viscous fluid governor that slows the rotating speed of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

WT - 3/8" or 1/2" thread / 3-6" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a SLOW viscous fluid governor that slows the rotating speed of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

Turbine for Superior Drive and Thrust

Comes with Rotating Chain, Drilling Heads & Additional Chain

• 30-50 GPM, up to 3,000 PSI
• 3 rear jets @ 90° on Rotation for all nozzles
• 3/4" good for 4"-8" pipes - weight 2.2 lb
• 4 rear jets at 20° on 3/4"
• Comes with case
• Easy and fast changeable chain retainers
• Carbide drilling head available

Carbide head can be used instead of steel drilling head for more aggressive drilling in pipe.

***Please note in comments during checkout the PSI and GPM you require ***

Turbine Cutting Nozzle Specifications

Video of 3/4" Avian

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI (3,000 PSI for 1")

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

Original Root Rat Nozzle Kit

Kits include chain & cable rotors  ***Due to supply issues only Link chain is available***
Comes with case and accessories

1/2" Kits:

• 12 - 25 GPM
• Will make a 4" 90° turn
• Quick chain replacement with heavy duty cotter keys
• Stainless high speed thrust bearing
• Available with link chain or roller chain
  

Original Root Rat Nozzle Kit

Kits include chain & cable rotors ***Due to supply issues only roller chain is available***
Comes with case and accessories

3/8" Kits:

• 4 - 12 GPM, 2,000 to 10,000 PSI
• Hardened stainless link chair or rotor
• Quick chain replacement with SS socket head cap pins, allen screws hold cable in place for easy replacement