Penetrating Nozzles

WV WARTHOG® - 1/4" thread / 2-4" pipe /  works with 3-4k PSI

The WARTHOG® WV uses a rotating head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

WS - 1/2" thread / 4-8" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a SLOW viscous fluid governor that slows the rotating speed of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The premier penetrating nozzle made by NCT

The rotating front jet forms a high efficiency water cone with high impact capacity for blockages and obstructions making the nozzle much more aggressive than a conventional front jet penetrator.   This nozzle is ideal when jetting downstream from the entry point to the main for scale removal, grease, roots etc.

• High Impact Rotating Front Jet !
• 3 Ceramic rear jets @ 20°
• 10 - 25 GPM, up to 4,000 PSI 

'Bora' Penetrator Nozzle Specifications

Video of Twister Penetrator Nozzle

The premier penetrating nozzle made by NCT

The rotating front jet forms a high efficiency water cone with high impact capacity for blockages and obstructions making the nozzle much more aggressive than a conventional front jet penetrator.   This nozzle is ideal when jetting downstream from the entry point to the main for scale removal, grease, roots etc.

• High Impact Rotating Front Jet !
• 8 Ceramic rear jets @ 20°
• 30 - 50 GPM, up to 3,000 PSI 

'Bora' Penetrator Nozzle Specifications

Video of Twister Penetrator Nozzle

The premier penetrating nozzle made by NCT

The rotating front jet forms a high efficiency water cone with high impact capacity for blockages and obstructions making the nozzle much more aggressive than a conventional front jet penetrator.   This nozzle is ideal when jetting downstream from the entry point to the main for scale removal, grease, roots etc.

• High Impact Rotating Front Jet !
• 8 Ceramic rear jets @ 20°
• 50 - 80 GPM, up to 3,000 PSI 

'Bora' Penetrator Nozzle Specifications

Video of Twister Penetrator Nozzle

A great degreaser and de-icer nozzle

• 3F @ 10° and 6R jets @ 45°
• Change rear to 35° for extra pulling power
• 3 - 20 GPM
• Up to 4,000 PSI

A 45° angle is the default choice for this pattern. However, when faced with a longer run a 35° angle will provide extra pulling power. Pattern: 3 forward jets @ 10° and 6 rear jets @ 45° Please specify if 35° is needed.

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

A great degreaser and de-icer nozzle

• 3F @ 10° and 6R jets @ 45°
• Change rear to 35° for extra pulling power
• 3 - 9 GPM
• Up to 4,000 PSI

A 45° angle is the default choice for this pattern. However, when faced with a longer run a 35° angle will provide extra pulling power. Pattern: 3 forward jets @ 10° and 6 rear jets @ 45° Please specify if 35° is needed.

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

A great degreaser and de-icer nozzle

• 3F @ 10° and 6R jets @ 45°
• Change rear to 35° for extra pulling power
• 3 - 20 GPM
• Up to 4,000 PSI

A 45° angle is the default choice for this pattern. However, when faced with a longer run a 35° angle will provide extra pulling power. Pattern: 3 forward jets @ 10° and 6 rear jets @ 45° Please specify if 35° is needed.

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

A great degreaser and de-icer nozzle

• 3F @ 10° and 6R jets @ 45°
• Change rear to 35° for extra pulling power
• 3 - 20 GPM
• Up to 4,000 PSI

A 45° angle is the default choice for this pattern. However, when faced with a longer run a 35° angle will provide extra pulling power. Pattern: 3 forward jets @ 10° and 6 rear jets @ 45° Please specify if 35° is needed.

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Stainless steel construction
• 2-4 GPM
• Up to 4,000 PSI

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Stainless steel construction
• 3-9 GPM
• Up to 4,000 PSI

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Replaceable ceramic inserts
• Stainless steel construction
• 6-12 GPM
• Up to 4,000 PSI

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Replaceable ceramic inserts
• Stainless steel construction
• 10-25 GPM
• Up to 4,000 PSI

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 2 - 4 GPM
• Up to 4,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 4 - 9 GPM
• Up to 4,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 6 - 12 GPM
• Up to 4,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 10 - 25 GPM
• Up to 4,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 30 - 50 GPM
• Up to 3,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 50 - 80 GPM
• Up to 3,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

Successfully navigates over offsets in the pipe!
Removes obstructions and opens blockages in no time!
15° Rear jets to flush back debris!

• 3 front jets at 15° and 1 front jet at 0°
• 6 or 8 rear jets @ 15°
• Replaceable steel and ceramic inserts
• 30 - 50 GPM, up to 3,000 PSI

Successfully navigates over offsets in the pipe!
Removes obstructions and opens blockages in no time!
15° Rear jets to flush back debris!

• 3 front jets at 15° and 1 front jet at 0°
• 6 or 8 rear jets @ 15°
• Replaceable steel and ceramic inserts
• 50 - 80 GPM, up to 3,000 PSI