Ridgid Camera Parts & Accessories

The RIDGID Count Plus (31753) Cable Counter is designed for use with SeeSnake Standard and SeeSnake Mini Reels. The CountPlus is a distance counter that can track the total length of pushrod that has been run out of the drum or measure distance from some local zero-point selected during the inspection (such as a pipe head or joint). The CountPlus can also display overlays of text messages such as labels of pipe line features. The CountPlus is intuitive to operate - simply press on the CountPlus Menu Key to bring up the Main Menu screen with three icons on it.

The CountPlus interface allows you to set up and modify a number of important parameters for use with your SeeSnake System. These include:

The RIDGID 66013 Battery & Charger Kit with Two 18V Advanced Lithium 2.5Ah Batteries and 120V Charger delivers superior performance, dependability, and maximum tool uptime, allowing users to work on the job even longer. The 18V Advanced Lithium 2.5Ah battery is equipped with a charge indicator light and ergonomic side release buttons. It provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing. It can can deliver more than 250 presses per charge (0.5" Cu) when used with press tools. The battery is fully charged in 39 minutes maximum.

The included RBC 30 120V Battery Charger is designed for use with 18V lithium-ion batteries. The charger can fully charge an 18V 2.5 Ah battery in 39 minutes maximum, while the maximum charge time for an 18V Lithium 5.0 Ah battery (sold separately) is 82 minutes. The charger features a passive convection cooling (no fan) design to prevent over-heating, while built-in LEDs indicate battery charge status and temperature monitoring. The charger requires no adjustments.

The RIDGID 44848 Battery & Charger Kit with 18V Advanced Lithium 2.0Ah Battery and 120V Charger is designed to have superior performance, life and dependability. The 18V Advanced Lithium 2.0Ah Battery provides protection against short-circuit, over-current and over-discharge protection as well as cell balancing. The battery can deliver more than 200 presses per charge when used with press tools. It is fully charged in 30-45 minutes.

The included RBC 20 120V Battery Charger is designed to charge an 18V 2.0Ah Advanced Lithium-Ion RIDGID battery in approximately 45 minutes. The charger features a passive convection cooling (no fan) design to prevent over-heating, while built-in LEDs indicate battery charge status and temperature monitoring. The charger requires no adjustments.

The RIDGID CrossChek Rig is designed for use with the SeeSnake Inspection System. It is used to visually inspect the straight bores produced by pneumatic underground piercing and boring tools. The CrossChek helps to reduce the likelihood of undetected cross bores before a new utility line is installed.

The CrossChek Rig mounts to the camera head and pushrod of the system (not included). Once a bore is completed, the air hose is attached to the CrossChek and used to pull the camera head through the bore for inspection. Once the inspection is completed, a rope is used to retrieve the unit from the bore and pull the utility to be installed into place.

The RIDGID 43883 CrossChek Rig is designed for use with the SeeSnake nanoReel Inspection System. It is used to visually inspect the straight bores produced by pneumatic underground piercing and boring tools. The CrossChek helps to reduce the likelihood of undetected cross bores before a new utility line is installed.

The CrossChek Rig mounts to the camera head and pushrod of the rM200 system (not included). Once a bore is completed, the air hose is attached to the CrossChek and used to pull the camera head through the bore for inspection. Once the inspection is completed, a rope is used to retrieve the unit from the bore and pull the utility to be installed into place.

The RIDGID 47793 25mm Pipe Guide is suitable for use with the SeeSnake microReel, MAX rM200 Series, and Compact2 camera systems. The pipe guide fits a 25 mm camera head. It is designed to help center the camera in pipes, keeping the camera clear of bottom sludge in the pipe. By bringing the camera head closer to the center of the pipe, the pipe guide improves picture quality, allowing the camera to see equally in all directions and helping to keep the camera lens clear during inspections.

The RIDGID 46708 85mm Pipe Guide is suitable for use with the SeeSnake microReel, MAX rM200 Series, and Compact2 camera systems. The pipe guide fits a 25 mm camera head. It is designed to help center the camera in pipes, keeping the camera clear of bottom sludge in the pipe. By bringing the camera head closer to the center of the pipe, the pipe guide improves picture quality, allowing the camera to see equally in all directions and helping to keep the camera lens clear during inspections.

The RIDGID 46713 125mm Pipe Guide is suitable for use with the SeeSnake microReel, MAX rM200 Series, and Compact2 camera systems. The pipe guide fits a 25 mm camera head. It is designed to help center the camera in pipes, keeping the camera clear of bottom sludge in the pipe. By bringing the camera head closer to the center of the pipe, the pipe guide improves picture quality, allowing the camera to see equally in all directions and helping to keep the camera lens clear during inspections.