3/8" Nozzles

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The semi-radial rotating enz®  nozzles with their 4 retroacting cutting-jets at an angle of approx. 45° cause simultaneously the cleaning procedure and the thrust for the forward move of the tool i.e. the jets combine rotation and thrust in one function resulting in a low water consumption. With sufficient water capacity, optional thrust jets can facilitate upward cleaning.

Applications

• Cleaning of pipes before TV-recordings
• To remove mineral deposits in pipes
• To remove roots up to Ø 0.2 inch

***Please leave a comment upon checkout noting the PSI and GPM required***

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.05 inch.

Transport and water costs are noticeably reduced.
 

Characteristics

• Easy to handle
• The tool is practically maintenance-free

 Applications

• To remove fat, roots and harder incrustations
• For operation with recycling water and fresh water

***Please leave a comment upon checkout noting the PSI and GPM required***

Nozzle Features a Rotating Jet for Total Cutting Performance.

Features:

• Rotating rear jet for flushing, debris removal and roots
• 4 - 12 GPM
• Up to 4,000 PSI
• Easily navigates traps and bends!
• Highly effective in 3" - 8" pipes
• Available in 1/4" and 3/8" sizes

***Please leave a comment upon checkout noting the PSI and GPM required***

Excellent Pulling and Flushing Power!!

• 6 - 12 GPM
• 6 or 8 Rear jets @ 15°
• Up to 4,000 PSI

The shape of the Arzino flushing nozzle allows easy navigation through tight elbows and provides easy retrieval from the pipe.  This Nozzle is ideal where high thrust is required in the pipe.  Comes 6 or 8 rear steel inserts set at a 15° angle for flushing power.  Also has optional front jet for Penetration.

Arzino Flushing Nozzle Specifications

Video of Arzino Flushing Nozzle

Hardened Stainless Steel
All Ceramic Inserts
PERFORMANCE AND DURABILITY!

• 6 - 12 GPM
• up to 4,000 PSI
• 30° High angle jets for effective cleaning of pipe walls
• A Deviator set inside the nozzle maximizes flow efficiency reducing pressure drop

Best choice in frequent mainline cleaning

Isonzo Cleaning Nozzle Specifications

Video of Isonzo Grenade Cleaning Nozzle

A great degreaser and de-icer nozzle

• 3F @ 10° and 6R jets @ 45°
• Change rear to 35° for extra pulling power
• 3 - 20 GPM
• Up to 4,000 PSI

A 45° angle is the default choice for this pattern. However, when faced with a longer run a 35° angle will provide extra pulling power. Pattern: 3 forward jets @ 10° and 6 rear jets @ 45° Please specify if 35° is needed.

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Maximum Cleaning Action from 90° Side Jets with 45° for Flushing / Pulling.

• 2 side jets @ 90° & 2 rear jets @ 45°
• 6 - 12 GPM, up to 4,000 PSI

CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Superior Flushing Power

A pristine round hex design.
Jet pattern: 6 rear jets @ 20°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Superior Flushing Power

A pristine round hex design.
Jet pattern: 6 rear jets @ 20°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

This nozzle is great for long runs.
It allows for cable or camera hook-ups.
Excellent for towing

• 6 Drilled rear jets at 20°
• 6-12 GPM
• 2000-4000 PSI

This nozzle is great for long runs.
It allows for cable or camera hook-ups.
Excellent for towing

• 6 Drilled rear jets at 20°
• Available in 3/8" and 1/2"
• 5-25 GPM
• 2000-4000 PSI

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Replaceable ceramic inserts
• Stainless steel construction
• 6-12 GPM
• Up to 4,000 PSI

A dual-angle nozzle combining thrust and flushing power

Pattern: 3 rear jets @ 45° & 3 rear jets @ 25°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

A dual-angle nozzle combining thrust and flushing power

Pattern: 1 forward, 3 rear jets @ 45° & 3 rear jets @ 25°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 6 - 12 GPM
• Up to 4,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

The Reaper’s rotating front jet is a 0-degree straight water stream up to 4,000 PSI (3,000 PSI for 1")

Nozzle designed for various applications (cutting, cleaning, removal, etc.) and comes with Four rear jets that create a 20-degree angle for maximum thrusting and pulling power.

DURABILITY & RELIABLE – high impact nozzles are constructed with stainless steel housing and Tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles

The "Tremol" series of spinner nozzles are very effective tools for cleaning inside of pipes. The rotating element and jets scour the surface of the pipe loosening hard debris. Spinner nozzles are great for descaling and emulsifying grease.

• 4 Jets on spin barrel @ 90°
• 6 or 3 Rear jets @ 20° 
• 6-12 GPM, up to 4,000 PSI
• Cleans the entire inside pipe wall

Tremol Nozzle Specifications

Video of Tremol Spinner Nozzle

WT - 3/8" or 1/2" thread / 3-6" pipe

Get 10% off a Warthog Service Kit when you buy a Warthog Nozzle*

The WARTHOG® uses a SLOW viscous fluid governor that slows the rotating speed of the head, allowing the jets to deliver their full power against pipe interiors.

• The WARTHOG® front boring jet is 15° off-center.
• This creates a powerful front end that cuts through roots, sediments, grease and other blockages with ease.
• Top performance and dependability on ALL sizes.

*discount automatically applied at checkout

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW
6-12 GPM, up to 4,000 PSI

Kit includes:

• Thruster/Flusher - 1F - 3R @ 25°
• Cleaner - 1F - 6R @ 45°
• Penetrator - 3F @ 10° - 6R @ 45°
• Spinner for Grease - (4) 2 @ 90° / 2 @ 45°
• Case and tip cleaner included
• Excellent value kits for all jetting applications

High Performance Package - With Case!
6-12 GPM, up to 4,000 PSI
Limited Time Special - Excellent Value - Quality Nozzles!

• Tremol- Spinner Nozzle for Descaling and Grease etc.
• Arzino - Egg Style Flushing Nozzle
• Isonzo - The Best General Cleaning Nozzle
• Raut - Forward Penetration - Blockage Removal
• High performance 4 nozzle kit ALL with replaceable inserts

Heat Treated for Wear Resistance

• 1F (optional) 4R @ 45° and 4R @ 20°
• Custom drilled for any pressure or flow
• Other Spray Patterns Available in 20° or 30°
• 6 - 12 GPM, up to 4,000 PSI

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Stainless steel construction
• 6-12 GPM
• Up to 4,000 PSI