1/8" Nozzles

Great for Small Pipe!
Drop Head on Swivel for Easy Navigating!
Very effective design for navigating P-traps and bends.

• 3R Jets at 45°
• Both nozzles set for 2.1 GPM at 1,500 PSI

The nozzle enz® KBRV is provided with 2 semi-radial jets directed forward in an angle of 45°. As a result, this nozzle must either be equipped with extra thrust jets or be mounted on a lance. The forward jets desintegrate most any residue and flush the debris ahead of the nozzle.

Applications

• To remove plastic deposits
• To clean heat exchangers
• Cleaning of fat deposits
• Flushing of the pipes from the house toward the main line

***Please leave a comment upon checkout noting the PSI and GPM required***

The semi-radial rotating enz®  nozzles with their 4 retroacting cutting-jets at an angle of approx. 45° cause simultaneously the cleaning procedure and the thrust for the forward move of the tool i.e. the jets combine rotation and thrust in one function resulting in a low water consumption. With sufficient water capacity, optional thrust jets can facilitate upward cleaning.

Applications

• Cleaning of pipes before TV-recordings
• To remove mineral deposits in pipes
• To remove roots up to Ø 0.2 inch

***Please leave a comment upon checkout noting the PSI and GPM required***

A great degreaser and de-icer nozzle

• 3F @ 10° and 6R jets @ 45°
• Change rear to 35° for extra pulling power
• 3 - 20 GPM
• Up to 4,000 PSI

A 45° angle is the default choice for this pattern. However, when faced with a longer run a 35° angle will provide extra pulling power. Pattern: 3 forward jets @ 10° and 6 rear jets @ 45° Please specify if 35° is needed.

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Maximum Cleaning Action from 90° Side Jets with 45° for Flushing / Pulling.

• 2 side jets @ 90° & 2 rear jets @ 45°
• 2 - 4 GPM, up to 4,000 PSI

CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Superior Flushing Power

A pristine round hex design.
Jet pattern: 6 rear jets @ 20°

• 2 - 4 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Superior Flushing Power

A pristine round hex design.
Jet pattern: 6 rear jets @ 20°

• 2 - 4 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

This Nozzle is an excellent choice when looking for full forward penetration. It has 'NO' rear jets which allows for maximum penetrating power.

Advantages are Control direction and speed of nozzle, pushes material towards the main sewer line

• 6 Front jets at 10° and 1 Front jet at 0°
• Stainless steel construction
• 2-4 GPM
• Up to 4,000 PSI

A dual-angle nozzle combining thrust and flushing power

Pattern: 3 rear jets @ 45° & 3 rear jets @ 25°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

A dual-angle nozzle combining thrust and flushing power

Pattern: 1 forward, 3 rear jets @ 45° & 3 rear jets @ 25°

• 2 - 20 GPM
• Up to 4,000 PSI

CAN BE CUSTOM DRILLED FOR ANY PRESSURE OR FLOW

Multiple front jets for penetrating total blockages, grease obstructions, etc.

• 3F @ 20° - 1F @ 0° steel inserts
• 6 or 3 Rear Jets @ 20°
• 2 - 4 GPM
• Up to 4,000 PSI

Raut Chisel Point Nozzle Specifications

Video of Raut Chisel Point Nozzle

The "Tremol" series of spinner nozzles are very effective tools for cleaning inside of pipes. The rotating element and jets scour the surface of the pipe loosening hard debris. Spinner nozzles are great for descaling and emulsifying grease.

• 4 Jets on spin barrel @ 90°
• 6 or 3 Rear jets @ 20° 
• 2-4 GPM, up to 4,000 PSI
• Cleans the entire inside pipe wall

Tremol Nozzle Specifications

Video of Tremol Spinner Nozzle

CUSTOM DRILLED FOR ANY PRESSURE OR FLOW
2-4 GPM, up to 4,000 PSI

Kit includes:

• Thruster/Flusher - 1F - 3R @ 25°
• Cleaner - 1F - 6R @ 45°
• Penetrator - 3F @ 10° - 6R @ 45°
• Spinner for Grease - (4) 2 @ 90° / 2 @ 45°
• Case and tip cleaner included
• Excellent value kits for all jetting applications