Picote Brush Coating

Picote Coating Brushes are used for Brush Coating Pipes by applying Picote Coating Resin using Picote Millers, and Picote Pumps.  They can also be used for gentle Cleaning/Sweeping out Debris/Water as needed in certain applications.

***NOTE:  BRUSHES ARE LISTED BY ACTUAL SIZE.

It is recommended to oversize your Brushes to the diameter of the Pipe you intend to Coat. 

For example, Coating a 4" Pipe with the Maxi Miller would involve x2 5" or even x2 6" Brushes. 

If you were Coating a 4" Pipe with the Mini Miller however, you would require a slightly different setup.  We would recommend using 4" Brush and a 5" Brush for this application.  

Please feel free to reach out to us directly if you have any questions or would like more clarification before placing your order.

Picote 100% Solids Epoxy is applicable to all non-potable and wastewater applications for pipe diameters between DN50 (2”) and DN300 (12”) for clay, concrete and cast iron pipes and DN32 (1 ¼”) and DN300 (12“) for copper, steel and PVC pipes.

All Picote Epoxy Kits will come with 6 cartridges, 8 tips, and 3 nuts.

Picote Fast Cure Epoxy is applicable to all non-potable and wastewater applications for pipe diameters between DN50 (2”) and DN300 (12”) for clay, concrete and cast iron pipes and DN32 (1 ¼”) and DN300 (12“) for copper, steel and PVC pipes.

Because of it's fast cure time, Picote Fast Cure Epoxy Kits are best suited for short pipe runs, and spot coating applications.

All Picote Epoxy Kits will come with 6 cartridges, 8 tips, and 3 nuts.

10mm & 13mm- For Mini Coating Pump Delivery Hose.

16mm- For Maxi Coating Pump Delivery Hose.

16.4ft

Picote Heater Spare Part

6 Cartridge Kit with 8 Tips, 3 nuts

14lbs 10oz, White

6 Cartridge Kit with 8 Tips, 3 nuts and 1x Smart Mixer

14lbs 10oz, White

Injectable Polyurethane Foam

6 Cartridge Kit with 8 Tips, 3 nuts.